Standard Features - HP Integrity rx2660 Quickspecs

QuickSpecs

Standard Features

Minimum System Minimum System Minimum System Minimum System
Maximum Server Maximum Server Maximum Server Maximum Server
Capacities Capacities Capacities Capacities
Standard System Features Standard System Features Standard System Features Standard System Features
One 64 bit Intel Itanium processor: Either dual core 1.6 GHz/18 MB L3 cache (533 MHz front
side bus), dual core 1.4 GHz/12 MB L3 cache (533 MHz front side bus), or single core 1.6
GHz/6.0 MB L3 cache (533 MHz front side bus); or dual core 1.66 GHz/18 MB 9140M
processor with L3 cache (667 MHz front side bus), dual core 1.42 GHz/12 MB 9120N processor
with L3 cache (533 MHz front side bus), or single core 1.6 GHz/12.0 MB 9110N processor with
L3 cache (533 MHz front side bus).
One I/O card cage. Either all PCI X card cage (two 266 MHz/64 bit slots and one 133 MHz/64
bit slot) or Combo I/O card cage (two PCI Express slots with 4×333 MHz ropes and one 133
MHz PCI X slot). Windows systems must order the Combo (PCI Express and PC X) I/O card cage.
The PCI X only card cage is not supported with Windows.
2 GB PC2 4200 x4 single rank Registered DDR2 SDRAMs (2×1GB DIMMs)
Eight DIMM slots
One hot swap power supply
Two 64 bit Intel Itanium processors: Dual core 1.66 GHz/18 MB 9140M processor with L3 cache
(667 MHz front side bus), dual core 1.42 GHz/12 MB 9120N processor with L3 cache (533 MHz
front side bus), or single core 1.6 GHz/12.0 MB 9110N processor with L3 cache (533 MHz front
side bus).
32 GB PC2 4200 x4 single-rank Registered DDR2 SDRAMs (8×4 GB DIMMs)
Eight DIMM slots
Two hot swap power supplies, providing N+1 protection for power supplies and power input
Three IO adapter cards
One internal DVD ROM or DVD+RW drive
Eight internal hot plug Serial Attached SCSI (SAS) disks
Four Operating System support: HP UX 11i version 2 (September 2006 Update required for dual
core processors); HP UX 11i version 3; Linux RHEL 4 U4 AS and ES, and SLES 10; OpenVMS
(V8.3 minimum version required); and Microsoft Windows Server 2003 Enterprise and Datacenter
Edition, Microsoft Windows Server 2008 for Itanium-based Systems, and Microsoft SQL Server
2005 and SQL Server 2008
Two Core IO Serial Attached SCSI (SAS) options, an embedded 8P SAS controller, and an
optional 8 port Smart Array P400 SAS host bus adapter. Windows only supports the 8 port Smart
Array P400 SAS host bus adapter.
Core dual port 10/100/1000Base TX LAN (with auto speed sensing; RJ 45 connector, Wake On
LAN support).
Integrated iLO2 Management Processor for remote management and HA monitoring.
Telnet and web console via 10/100Base TX management LAN (RJ 45 connector).
Two RS 232 serial ports, one for console from the integrated iLO2 management processor and
one from the processor dependent hardware bus (PDH).
Factory integration of processors, memory, disk drives, removable media, I/O cards, and HP
Universal 10000 G2 series racks.
Rackmountable into 19 inch cabinets-HP Universal 10000 Series G2 racks as well as many third
party racks, including field integration into existing HP System E racks.
Optional stand alone pedestal mount.
Three year warranty with next business day on site.
DA - 12698 Worldwide — Version 30 — April 13, 2012
HP Integrity rx2660 Server HP Integrity rx2660 Server HP Integrity rx2660 Server HP Integrity rx2660 Server
Page 3