Alcove Or Closet Installation - Fisher & Paykel smartload DGGX1US Installation Instructions Manual

Hide thumbs Also See for smartload DGGX1US:
Table of Contents

Advertisement

The area in which the dryer is located must be kept clear and free from combustible materials,
gasoline and other flammable vapours and liquids. A dryer produces combustible lint so the area
around the dryer must be cleaned regularly to keep it free of lint.
This dryer can only be vented from the rear and must be exhausted to the outdoors.
Alcove or closet installation
1
When installing
a dryer
in a closet/alcove
it must be
|
exhausted
to the outdoors.
No other fuel burning
1
appliance
can be installed
in the same closet
or alcove.
The top opening
area in the door must be a minimum
of 48 square inches (310cm 2) and the
bottom
opening
area must have a minimum
of 24 square inches (155cm2). These openings
must
never be obstructed
(a Iouvred door with the minimum
air opening
is acceptable).
Minimum
installation
clearances are required but more clearance is recommended.
:
ii_llll . ..........
III :
ii
ii
ii
"
1"(25ram)
1"(2Smm)
1" (25ram)
rain 56"
(1372
1422mm)
rain 2" (SOmm) rain 3"(76mm)
48 sq" (310cm 2)
total ventation
area

Advertisement

Table of Contents
loading

Table of Contents