Alcove Or Closet Installation - Fisher & Paykel Smartload DGGX1US Installation Instructions Manual

Fisher & paykel gas dryer installation instructions
Hide thumbs Also See for Smartload DGGX1US:
Table of Contents

Advertisement

The area in which the dryer is located must be kept clear and free from combustible materials,
gasoline and other flammable vapours and liquids. A dryer produces combustible lint so the area
around the dryer must be cleaned regularly to keep it free of lint.
This dryer can only be vented from the rear and must be exhausted to the outdoors.

Alcove or closet installation

WARNING
The top opening area in the door must be a minimum of 48 square inches (310cm
bottom opening area must have a minimum of 24 square inches (155cm
never be obstructed (a louvred door with the minimum air opening is acceptable). Minimum
installation clearances are required but more clearance is recommended.
1" (25mm)
6
When installing a dryer in a closet/alcove it must be
exhausted to the outdoors. No other fuel burning
appliance can be installed in the same closet or alcove.
1" (25mm)
1" (25mm)
min 2" (50mm) min 3" (76mm)
2
48 sq" (310cm
)
total ventation area
72 sq" (465cm
2
24 sq" (155cm
)
) and the
2
). These openings must
2
min 56"
(1372 – 1422mm)
2
)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dggx1

Table of Contents

Save Article as PDF