Fisher & Paykel AeroCare DE7027P Quick Start Manual

Getting Started Quickly

• Ensure the lint filter has been cleaned before each drying cycle. Check the lint filter has been replaced correctly

in its housing before using your dryer.

• Sort and load items into the dryer drum. Ensure that no items are caught in the way of the door, then close the

door. Check the door is fully closed before starting the dryer.

Ensure there is plenty of room for the garments to tumble freely while drying – do not overload your

dryer. Load in terms of the space clothes take up when dry rather than when they are wet.

1. Press POWER to activate your dryer.

2. Your dryer will default to the REGULAR cycle. Select your desired drying cycle by turning the SmartTouchTM

Control Dial.

3. Select your preferred drying options (if you wish to select different options from the default options programmed

for the cycle) using the SmartTouchTM buttons on the right hand side of the panel.

4. Touch the START/PAUSE button to start the drying cycle.

https://producthelp.fisherpaykel.com/us/Dry/Dryers/Vented/DG7027G1/User_Guide_DG7027G1/05_getting_started_quickly

Fig.45 AeroCare control panel (DE7027P, DG7027P)

Updated: Sat, 13 Nov 2021 02:37:23 GMT

Table of Contents

Do you have a question about the AeroCare DE7027P and is the answer not in the manual?

Page 1 Getting Started Quickly AeroCare DE7027P, DG7027P • Ensure the lint filter has been cleaned before each drying cycle. Check the lint filter has been replaced correctly in its housing before using your dryer. • Sort and load items into the dryer drum. Ensure that no items are caught in the way of the door, then close the door.
Page 2 The control panel may differ depending on what model of dryer you have. • If you make an invalid selection the dryer will beep to alert you. • When the cycle finishes, your dryer will beep to alert you and then turn off automatically. If the WRINKLE FREE option has been selected the machine will rotate the drum periodically after the end of the cycle, blowing cool air into the drum to help minimize wrinkling of the clothes.
Page 3 AeroCare DE7027G, DG7027G • Ensure the lint filter has been cleaned before each drying cycle. Check the lint filter has been replaced correctly in its housing before using your dryer. • Sort and load items into the dryer drum. Ensure that no items are caught in the way of the door, then close the door.
Page 4 If you wish to stop the dryer before the cycle has finished you MUST remove the clothes IMMEDIATELY and spread them out to cool. DO NOT leave the clothes in the dryer or bunched up in a clothes basket, these must be spread out in order for the heat to dissipate.

Aerocare dg7027p