Defining The Vs-88Dtp 8X8 Dvi - Twisted Pair Matrix Switcher; Figure 1: Vs-88Dtp 8X8 Dvi - Twisted Pair Matrix Switcher Front View; Table 1: Vs-88Dtp 8X8 Dvi - Twisted Pair Matrix Switcher Front Panel Features - Kramer VS-88DTP User Manual

4

Defining the VS-88DTP 8x8 DVI - Twisted Pair Matrix Switcher

Figure 1 and Table 1

Table 1: VS-88DTP 8x8 DVI - Twisted Pair Matrix Switcher Front Panel Features

# Feature
1 IR LED
2 IR Sensor
3 POWER LED
4 ALL Button
5 OFF Button
6 SELECT IN Buttons
7 SELECT OUT Buttons
8 STO Button
9 RCL Button
10 LOCK Button
1
11 EDID Button
12 OUTPUT Numbers
13 7-segment Display
1 Lights when configuring the EDID
Defining the VS-88DTP 8x8 DVI - Twisted Pair Matrix Switcher
define the front view of the VS-88DTP.

Figure 1: VS-88DTP 8x8 DVI - Twisted Pair Matrix Switcher Front View

Lights yellow when receiving a signal from an IR remote control
IR remote control signal receiver
Lights green when the device is powered on
Press to select all outputs (see Section
Press to disconnect one or all outputs (see
Press to select an input (1 to 8) following the selection of an output
Press to select an output (1 to 8) followed by the selection of an input
Press to store a matrix configuration
Press to recall a matrix configuration
Press and hold to toggle locking and unlocking the front panel buttons (see
Press to acquire the EDID (see Section
Indicates the relevant output to which an input (1 to 8, shown on the 7-segment display) is currently switched
Displays the selected video input switched to the output (marked above each input)
Function
7.1)
Section 7.2)
Section
7.5)
8.2.4)
5