Function Configuration (Master); Config Menu "Set Options" Functions List - Zapi COMBI AC1 User Manual

9.4 Function configuration (MASTER)

9.4.1 Config menu "SET OPTIONS" functions list

To enter the CONFIG MENU' it is necessary to push in the same time the right
side top and left side top buttons. Then roll until the SET OPTION item appears
on the hand set display. Push the ENTER button.
Opening Zapi Display
Push ROLL UP + SET UP simultaneously to enter
CONFIG MENU
The Display will show : SET MODEL
Press ROLL UP or ROLL DOWN button until SET
OPTIONS menu appear.
The Display will show : SET OPTIONS
Press ENTER to go in the SET OPTIONS MENU
The Display will show the first OPTION
Press SET UP or SET DOWN button in order to
modify the OPTION
The Display will show the new option
Press OUT to exit the menu
The Display will ask "ARE YOU SURE".
Press ENTER for YES, or OUT for No
The Display will show : SET OPTIONS
Press OUT again. Display now will show the
opening Zapi menu.
1) TILLER SWITCH
This option handles the input CNA#7 in AmpSaab [CNA#1 in AmpSeal]. This
input opens when the operator leaves the truck (tiller released). It is
Page - 40/86
CA1S2B ZAPI 1.00
24V 350A 00000
% ' %
' ' '
CONFIG MENU
SET MODEL
% ' '
' ' '
CONFIG MENU
SET OPTIONS
' % '
' ' '
HOURCOUNTER
RUNNING
' ' %
' ' %
HOURCOUNTER
KEYON
' ' '
' % '
ARE YOU SURE?
YES=ENTER NO=OUT
' % '
' ' '
CONFIG MENU
SET OPTIONS
' ' '
' % '
AEQZP0BA – COMBI AC1 - User Manual
' ' '
' % '