Description Of Console "Restore" Function - Zapi COMBI AC1 User Manual

Press OUT to return to the Opening Zapi Display
NOTE: in reality the SAVE and RESTORE function requires the Windows PC-
Console.

10.2 Description of console "RESTORE" function

The RESTORE PARAM function allows transfer of the Console's stored data into
the memory of the controller. This is achieved in a fast and easy way using the
method previously used with the SAVE PARAM. function.
The data that is available on the RESTORE PARAM. Function are listed here
below:
- All Parameter Values (PARAMETER CHANGE).
- Options (SET OPTIONS)
- The level of the Battery (ADJUST BATTERY)
ATTENTION: When the RESTORE operation is made, all data in the controller
memory will be written over and replaced with data being restored.
Flow Chart showing how to use the RESTORE function of the Digital Console.
Opening Zapi Display
Press ENTER to go into the General menu
The Display will show :
Press ROLL UP or ROLL DOWN button until SAVE
PARAM. appears on the display
The Display will show :
Press ENTER to go into the RESTORE PARAM.
function
The Display shows the type of Model stored, with a
Code Number
Keep pressing either ROLL UP and ROLL DOWN
buttons until the desired model appears on the
Display
Press ENTER to commence the Restore operation
The Display will ask "ARE YOU SURE".
Page - 58/86
' ' '
' % '
CA1S2B ZAPI V0.0
24V 350A 00000
' % '
' ' '
MAIN MENU
PARAMETER CHANGE
% ' '
% ' '
MAIN MENU
RESTORE PARAM.
' % '
' ' '
SELECT : MOD. 00
AC1 ZAPI V1
% ' '
% ' '
SELECT : MOD. 00
AC1 ZAPI V1
' % '
' ' '
ARE YOU SURE?
YES=ENTER NO=OUT
AEQZP0BA – COMBI AC1 - User Manual