Other Phonak Fm Receivers - Phonak Inspiro DynaMic User Manual

This feature is only available in the inspiro's Extended operating
mode.
The required procedure is as follows:
J Make sure that the receiver is connected to a hearing
device and that both the hearing device and the receiver
are switched on and the FM program is activated in the
hearing instrument.
J Ensure that the distance between the inspiro and the MLxi
or ML10i is approximately 20 cm / 8 inches. Select Receiver
options and then Identify receivers.
J The identification data should now be shown on the
inspiro's LCD display.
This feature is particularly useful in schools.

Other Phonak FM receivers

inspiro/DynaMic are compatible with all Phonak FM receivers.
If you have questions concerning a specific receiver, please consult
your hearing care professional or visit:
www.eschooldesk.com
We do not recommend using the inspiro/DynaMic with FM
receivers produced by other manufacturers.
65