Phonak Inspiro DynaMic User Manual page 55

J Start DynaMic by pushing the slider from OFF to ON during
the auto pairing time window of 8 seconds.
J After the initiation is complete, the name of DynaMic appears.
Press OK.
DynaMic joins the MultiTalker Network as a secondary trans-
mitter. It starts working as an FM transmitter.
After switching ON, the LED of the microphone turns off to save
power.
On the initiating inspiro's list of participants the microphone
can be recognized.
After pairing DynaMic with inspiro it is recommended to activate
the key pad lock of inspiro whenever possible.
MUTE: When DynaMic is turned ON it is possible to mute the
microphone. Switch the slider from ON to MUTE.
If DynaMic is not paired in the MultiTalker Network it
does not start to emit FM.
ON
RESET
MUTE
OFF
Rebecca Woods
55