Adjusting The Settings Of The Lcd Display - Phonak Inspiro DynaMic User Manual

Individual inspiro configuration

Adjusting the settings of the LCD display

The settings of the inspiro's LCD display are pre-set. Should you
wish to change the presets, please proceed as follows:
J Enter the Settings menu and then select Display.
J Select the Backlight menu to increase or decrease the level
of brightness of the backlight of the LCD display.
J Select Turn off light to set the time when the inspiro should
switch OFF the backlight in order to save power.
J Select Turn off display to set the time when the inspiro
should switch OFF the LCD display to save power. The
recommended setting is never.
You can also check the help in the inspiro menu for further
information.
Always check the inspiro ON/OFF slider to determine
whether the inspiro is either switched ON or OFF! If the
inspiro is ON and the LCD display is OFF, the display will be
black, whilst if the inspiro is ON and the background light is
OFF, the LCD display will be dimmed!
36