Lock Mlxi Push Button; Identifying Receivers - Phonak Inspiro DynaMic User Manual

Table of Contents

FM receivers

Lock MLxi push button

The MLxi push button can be either locked or activated. This

action can be performed by either the hearing care professional

or the inspiro user.

J In this mode, the MLxi functions automatically.

J This mode is recommended for all children.

The required procedure is as follows:

J Select Lock push button in the Receiver menu.

J Make sure that the distance between the receivers and the

inspiro is approximately 20 cm / 8 inches. Then use either the

left soft key to Lock the push button or the right soft key

to Activate the push button.

J Press the MLxi push button to check whether the setting has

successfully been altered.

The inspiro is able to identify Dynamic FM receivers, e.g. an

MLxi or ML10i. If it locates an MLxi, the inspiro can read

the identification data and display it on the LCD display. This

also helps in determining to whom the receiver belongs.

Table of Contents

Do you have a question about the Inspiro DynaMic and is the answer not in the manual?

Inspiro Dynamic