Getting Started
Switching ON DynaMic
DynaMic is a passaround microphone designed for use with
inspiro in the MultiTalker Network. It is not a standalone FM
transmitter.
To switch ON DynaMic, follow the steps below:
J inspiro and DynaMic are both OFF
J Switch ON inspiro: push the slider to the left until the green
mark appears and the LCD is activated (see page 24).
J Set-up the MultiTalker Network. Initiate your MultiTalker
Network by pressing "OK".
54
Need help?
Do you have a question about the Inspiro DynaMic and is the answer not in the manual?
Questions and answers