Table of Contents
Advertisement
5.
TROUBLESHOOTING
If you are unable to resolve an issue using the information provided in this
section, contact your reseller or service center.
Problem
No image appears
y
on-screen
Partial, scrolling
y
or incorrectly
displayed image
G Series User Manual
020-000524-02 Rev. 1 (03-2013)
-
Make sure all the cables and power connections are
correctly and securely connected See "Installation".
-
Check if the lamp is securely installed.
-
Make sure you have removed the lens cap and the
projector is switched ON.
-
Press "AUTO" on control panel or on remote control.
-
If you are using a PC (for Windows 95, 98, 2000, XP,
Windows 7):
1.
Click the
double - click
2.
Select the
3.
Verify that your display resolution setting is lower
than or equal to WUXGA (1920 × 1200).
4.
Click on the
projector is still not projecting the whole image,
change the monitor display:
4.1 Verify the resolution setting is lower than or equal
to WUXGA (1920 × 1200).
4.2 Select the
tab.
4.3 Click on
monitor types
resolution mode you need under the
box.
4.4 Verify that the resolution setting of the monitor
display is lower than or equal to WUXGA (1920 ×
1200).
Section 5: Troubleshooting
Solution
My Computer
"
" > "
Display
.
"
"
Settings
tab.
"
"
Advanced Properties
"
Change
button under the
"
"
Show all devices
"
under the SP box; choose the
"
Control Panel
and then
"
button. If the
"
Monitor
"
. Next, select
Standard
"
"
Models
"
"
"
5-1
Hide quick links:
Advertisement
Table of Contents
