Christie DHD550-G User Manual page 53

wireless LAN.
SNMP Panel
y
- The E Series SNMP (Simple Network Management Protocol) interface
provides network administrators with a common way to manage their
network devices from a single remote location. SNMP allows an
administrator to query a number of devices to see their current status/
configuration. It also allows operators to change configuration values
and configure trap notifications to be sent when certain events occur.
(eg. Loss of signal, power state change, etc)
`
`
- SNMP Read Community (default setting: private) – this is a plain-
text password. This must also be entered in the MIB browser. This
password allows the various settings in the projector to be queried.
- SNMP Location (default setting: blank) – This field can be used as a
description to where a projector is located in a building. SNMP emails
sent will specify this location.
- Trap IP Address (default setting: 0.0.0.0) – This field must be filled in to
receive Traps from the projector. The Trap IP Address should be filled
in with the IP Address of the computer on which you would like to view
received traps.
- Trap Email 1/2 (default setting: Blank) – The Trap Email 1 and 2 must
be set to an email address that is configured under the mail server that
you will enter in the "SMTP Server IP Address" field.
- Email from Address (default setting: blank) – the "Email from Address"
that will appear as the source of the SNMP emails.
- SMTP Server IP Address (default setting: 0.0.0.0) – Enter your mail
server's IP address.
Trap Configuration Panel
y
Set the SNMP actions for the system events. The dropdown options are:
SNMP Trap + Email, Email, SNMP Trap, and Disabled.
G Series User Manual
020-000524-02 Rev. 1 (03-2013)
Emails are sent to the mail server configured in the projector
settings. Up to 2 user email accounts can be selected. Any
important information regarding the event will be located in the body
content of the email.
SNMP Traps are notifications that are sent from the projector. They
are only received by a trap receiver (MIB Browser) in the computer.
Section 4: Operation
4-25