MAINTENANCE AND TROUBLESHOOTING
4. Blade Stops Turning:
Verify Operation
(A)
Check engine operating if not restart
(See Setup, Startup, Adjustment,
Operation and Shutdown
5. Engine Stops:
NOTE:
The Honda Engine is equipped with an oil level sensor that will stop the engine on a low oil level
Direction of
Movement
(A)
Pull Starter Cord straight back
in a smooth fast motion
(D)
Clean and Readjust engine
Spark Plug (See Spark Plug
Adjustment and Replacement)
MK-2005G
(See V-belt Inspection,
Adjustment and Replacement)
Starter Cord
Upper Limit
Verify fuel level is below
the throat of the Fuel Tank
Spark Plug
Return to MK Diamond
Revision 12/00, Effective Date December 26, 2000
V-belt
(B)
Check V-belts
Fill Throat
(B)
Return to
MK Diamond
for Repair
(E)
Return to
MK Diamond
for Repair
(C)
Return to MK Diamond
Proper Oil Level
(C)
Check for proper oil level
(See Maintenance section if low)
Low level
Page 47