MK Diamond Products MK- 2005G Owner's Manual & Operating Instructions page 33

MAINTENANCE AND TROUBLESHOOTING
10. Protective Wooden Strip Replacement:
The protective wooden strip is to protect the Movable Cutting Table from damage during operation. Over
time, the wooden strip will become grooved from use. A grooved wooden strip will not support masonry
during cutting causing the blade to "break through" the piece instead of performing a smooth cut (MK
Diamond Part No. – 156427).
Movable
Cutting Table
(A)
Remove the Movable
Cutting Table
Worn Wooden
Strip
New Wooden
Strip
(D)
Replace Worn
Protective Wooden Strip
MK-2005G
Roller Wheels
(B)
Place Movable Cutting
Table On Work Bench
with Roller Wheels Up
Retaining Screw
(F)
Place Movable Cutting Table on
Work Bench – Wheels Up,
Reinstall Retaining Screws
Revision 12/00, Effective Date December 26, 2000
Remove the two Protective
Wooden Strip Retaining Screws
Phillips
Screwdriver
Install the Movable
Phillips
Screwdriver
Retaining Screw
(C)
Movable
Cutting Table
(G)
Cutting Table
Page 33