MK Diamond Products MK- 2005G Owner's Manual & Operating Instructions page 39

MAINTENANCE AND TROUBLESHOOTING
15. Fuel Sediment Cup Cleaning:
1. Gasoline is highly flammable and explosive. You can be burned or seriously injured when
handling fuel.
2. To fuel, stop engine if running and allow it to cool.
3. Refuel in a well-ventilated area
4. Keep gasoline away from appliance pilot lights, barbecues, electric appliances, power tools,
etc.
5. Wipe up spills immediately.
NOTES: 1. Conform to Federal, State and Local laws for the proper disposal of fuel
2. Fuel can damage paint and plastic. Be careful not to spill fuel when filling the fuel tank.
Damage caused by spilled fuel IS NOT covered under the warranty.
3. DO NOT use stale or contaminated gasoline or an oil/gasoline mixture.
4. If using the Universal Stand with the MK-2005G, an OSHA approved ladder is recommended
when fueling.
5. When installing the Sediment Cup retaining bolt, ensure the threads of the bolt are aligned
with the threads on the Fuel Valve so as not to "cross-thread the nut."
Direction of
Movement
(A)
Place Fuel Valve in
the OFF position
Fuel Sediment
Cup
(D)
Remove Fuel Sediment Cub
MK-2005G
Fuel Valve Turn counter-
clockwise to
loosen
10mm Wrench
Drain the Fuel Sediment Cup
by removing the angled
Fuel Drain screw
Clean Cup
Clean Fuel Sediment Cup using
a nonflammable solvent – allow
Sediment Cup to dry
Revision 12/00, Effective Date December 26, 2000
Fuel Drain
Screw
(B)
(E)
Turn counter-
clockwise to
loosen
(C)
Remove Sediment Cup
Retaining Screw
Turn clockwise
to tighten
(F)
Install Fuel Sediment Cup and
Sediment Cup Drain Screw
Retaining
Screw
Page 39