MK-5000G
(G)
Rod Cooling Channels and
recheck flow.
Movable Cutting Table Does Not Move Correctly
(A)
Check for Roller Wheel Damage.
Blade stops Turning
(A)
Check to see if engine is
running.
(H)
Verify Water Pump suction is
clean and pump impeller is
turning. Pump Impeller is inside
water inlet.
(B)
Verify ease and freedom of
Movement.
(B)
Check belts. (See Belt
Inspection, Adjustment and
Replacement)
36
TrOUBLesHOOTiNG
(I)
Verify Water Pump drive end is
in the operating position.