Specifications - Hd 13T21 Std-Xxx-Fxxx - Hatteland HD 08T21 STD-xxx-Fxxx User Manual

Series x - standard display (std) models 8.0 inch standard display/13.3 inch standard display
Table of Contents

Advertisement

Specifications - HD 13T21 STD-xxx-Fxxx

PRODUCT SPECIFICATIONS - HD 13T21 STD-xxx-Fxxx
TFT Technology:
• 13.3 inch TFT Liquid Crystal Display module
• Widescreen, Aspect Ratio 16:10
• a-si TFT Active Matrix
• CCFL Backlight
TFT Characteristics:
• Native Resolution
: 1280 x 800 (WXGA)
• Pixel Pitch (RGB)
: 0.2235 (H) x 0.2235 (V) mm
• Response Time
: 6/10ms (typical) (Tr/Tf)
• Contrast Ratio
: 800:1 (typical)
• Light Intensity
: 400 cd/m2 (typical)
• Viewable Angle
: 70 deg (H) 60 deg (V) (typical)
• Active Display Area
: 286.08 (H) x 178.8 (V) mm
• Max Colors
: 16.7 million
Synchronization:
• Digital separate synchronization
• Composite synchronization
• Synchronization on green
• Auto detects on chosen source
• Video Signal
: Analog RGB 0,7Vp-p
: Input Impedance 75 Ohm
Synchronization Range:
• Horizontal
: 24 kHz to 81 kHz
• Vertical
: 50 Hz to 75 Hz*
* 60Hz is recommended for optimal picture quality
Supported Signals:
Resolutions:
• WVGA
: 640 x 480 (including 720 x 400)
• WSVGA
: 800 x 600
• WXGA
: 1024 x 768, 1280 x 800*
* Recommended for optimal picture quality
Power Specifications:
Power Supply:
• 2 x 24VDC
: Model HD 13T21 STD-Exx-Fxxx
Dual input, galvanic isolated, automatic switch between power source
Power Consumption:
• Operating
: 20W (typ) - 30W (max)
For a full overview of typenumbers, please review the following link:
www.hatteland-display.com/pdflink/ind100780-3.php
Available Standard Models:
• HD 13T21 STD-EA1-FAGP
= Dual DC, GDC, Buzzer, PCTouch
• HD 13T21 STD-EA1-FOGP
= Dual DC, Optical Bonding Technology, GDC, Buzzer, PCTouch
Compass Safe Distance: HD 13T21 STD-xxx-Fxxx
MTBF (Mean Time Between Failures - MIL-HDBK-217 GB 25ºC) = TBD hours
T E S T I N G / A P P R O V A L S
IEC 60945 4th (EN 60945:2002) (pending)
GL - Germanischer Lloyd (pending)
BV - Bureau Veritas (pending)
IND100129-153
Standard: 80cm
This product have been tested / type approved by the following classification societies:
IACS E10 (pending)
DNV - Det Norske Veritas (pending)
LRS - Loyd's Register of Shipping (pending)
Note: All specifications are subject to change without prior notice!
Physical Considerations:
• 355.00 (W) x 248.50 (H) x 58.00 (D) mm
• 13.98" (W) x 9.78" (H) x 2.28" (D)
• Compatible VESA mounting 75mm, 4xM4 VESA mounting, Max 8mm deep
• Built-in Console mounting 4 x M5x15mm screws
• Weight: TBD kg (approx)
Signal Terminals:
• DVI-I Signal IN
: 1 x 29p DVI Female (or as RGB IN with adapter)
• Touchscreen
: 1 x USB TYPE B Connector (female)
• DC Power IN
: 2 x SL-SMT 90F (1 x 2 pole)
User Controls:
Behind front bezel - Glass Display Control™ (GDC) IP66:
• Power On/Off, Brightness Control (-/+), Light Sensor (not visible)
• Programmable Alarm LED, Buzzer (not visible)
Environmental Considerations:
• Operating
: Temperature -15 deg. C to +55 deg. C
- Humidity up to 95%
• Storage
: Temperature -20 deg. C to +60 deg. C
- Humidity up to 95%
• IP Rating
: Protection: IP66 front - IP22 rear (EN60529)
Safety Considerations:
Even although the test conditions for bridge units provide for a maximum
operating temperature of 55°C, continuous operation of all electronic
components should, if possible, take place at ambient temperatures of only
25°C. This is a necessary prerequisite for long life and low service costs.
Factory Mounted Options:
• Optical Bonding Technology
• Sunlight Readable / High Bright (includes Optical Bonding)
Available Accessories:
• TBD
* Release date to be con rmed. Please contact us for more information.
Steering: 45cm
& C E R T I F I C A T E S
ClassNK - Nippon Kaiji Kyokai (pending)
ABS - American Bureau of Shipping (pending)
23
INB100535-2 (Rev 1)
model*
2/2

Advertisement

Table of Contents
loading

Table of Contents