Table of Contents
Advertisement
5.22
Use Network Options (Menu 22) (continued)
STEP ACTION
12
YES
13
NO
14
YES
15
YES
16
0
5.23
Define Circuit Text (Menu 23)
STEP ACTION
1
NO*
2
YES
3
NO
4
123
5
YES
6
YES
7
000
8
YES
* from last step of previous menu
Issue 02 Feb 92
DISPLAY
Press YES to
INSERT NEW NODE
Press YES to
DELETE NODE
Delete before >01
Delete Node
Press YES to
DELETE NODE
Press <YES> to
USE NETWORK OPTIONS
DISPLAY
Press <YES> to
DEFINE CIRCUIT TEXT
CCT >001 000 000 000
CCT 001 >000 000 000
CCT 001 >123 000 000
TEXT
CCT 001 123 >000 000
TEXT
CCT >001 123 456 789
TEXT TEXT TEXT
CCT >000 NOT VALID
YES to continue
Press YES to
DEFINE CIRCUIT TEXT
REMARKS
Press NO to go to Delete Node. Press YES to go to step 10. Press 0 to
go to step 1
Press YES to delete a Node. Press NO to go to step 2. Press 0 to go to
step 1
Press YES to delete indicated Node. Enter figures or use arrows to step
through and eneter different Node
Press 0 to go to step 1. Press YES to go to previous step. Press NO to go
to step 2
Press NO to go to Define Circuit Text menu. Press YES to repear this
menu. Use arrow keys to step through menus. Press 0 to quit
REMARKS
Press YES to Define Circuit Text from the dictionary. Press NO to go to
to Install DC3 menu. Press 0 to quit
Press YES to accept displayed data. Press NO to change it. Enter
figures or use arrow keys to enter a new circuit.
Text is to be changed. Enter number of the first word of text (see
dictionary) then press YES to accept it
First word of text entered. Press YES to accept it
First word accepted and displayed. Repeat the procedure for the other
two words
All words entered and accepted. Press YES to go to next circuit or use
figures or arrows to select aother circuit. Enter 000 to quit
Press YES to go to step 1
Press NO to go to Install DC3 menu. Press YES to repeat this menu.
Use arrow keys to step through menus. Press 0 to quit
TS2000 (V2+) User Manual
Page 5 - 17
Advertisement
Table of Contents
