Table of Contents
Advertisement
5.9
Alter Clock (Menu 10)
STEP ACTION
1
NO*
2
YES
3
YES
4
YES
5
YES
* from last step of previous menu
5.10
Alter Passcode (Menu 11)
STEP ACTION
1
NO*
2
YES
3
1234
4
1234
5
(YES)
* from last step of previous menu
A Passcode entry that matches an existing Passcode will not be accepted
Issue 02 Feb 92
DISPLAY
Press <YES> to
ALTER CLOCK
Date is >DD/MM/YYYY
time is hh:mm:ss
Date is
DD>MM/YYYY
time is
hh:mm:ss
Date is
DD/MM/YYYY
time is
hh:mm>ss
Press <YES> to
ALTER CLOCK
DISPLAY
Press <YES> to
ALTER PASSCODE
Enter new User Code
Re-enter to Confirm
Code confirmed OK
Press any key
Press <YES> to
ALTER PASSCODE
REMARKS
Press YES to set system date and time. Press NO to go to Alter
Passcode menu. Use arrow keys to step through menus. Press 0 to
quit
Enter figures to change indicated date or time if required then press
YES to accept. Press NO to reset figure to 01. Use arrows to step
through figures
Day accepted. Continue to enter figures to change indicated date or
time then press YES to accept. Press NO to reset figure to 01. Use
arrows to step through figures
Minutes accepted. Enter figures for seconds then press YES to
accept when time is right. Press NO to reset figure to 01. Use arrows
to step through figures
Seconds accepted. Press NO to go to Alter Passcode menu. Press
YES to repeat this menu. Use arrow keys to step through menus.
Press 0 to quit
REMARKS
Press YES to alter the Passcode of the present User. Press NO to go
to Define Users menu. Use arrow keys to step through menus. Press
0 to quit
Enter four or six figures for a new Passcode for this user
Figures accepted. Re-enter figures to confirm accuracy
Second entry agrees with the first. New Passcode is now active
Press NO to go to Time Switch menu. Press YES to repeat this menu.
Use arrow keys to step through menus. Press 0 to quit
TS2000 (V2+) User Manual
Page 5 - 6
Advertisement
Table of Contents
