Table of Contents
Advertisement
5.2
View Circuits (Menu 3)
STEP ACTION
1
No*
2
YES
3
YES
4
000
5
YES
* from last step of previous menu
5.3
View Event Log (Menu 4)
STEP ACTION
1
No*
2
YES
3
NO
* from last event of previous menu
5.4
Select Walk Test (Menu 5)
STEP ACTION
1
No*
2
YES
3
YES
4
YES
5
(operate
circuit)
6
(YES)
7
YES
* from last step of previous menu
Issue 02 Feb 92
DISPLAY
Press <YES> to
VIEW CIRCUITS
CCT >001 Healthy
TYPE/TEXT
CCT >002 Healthy
TYPE/TEXT
CCT >000 NOT VALID
YES to continue
Press YES to
VIEW CIRCUITS
DISPLAY
Press <YES> to
VIEW EVENT LOG
(last event)
(time date)
Press YES to
VIEW EVENT LOG
DISPLAY
Press <YES> to
SELECT WALK TEST
Press YES to
WALK TEST SYSTEM
WALK TEST WARDS ? :-
* * * * * * * *
Operate circuits
Any key to end
(Cct No.) Active
Type/Text
CIRCUITS ACTIVATED
in numerical order
Press YES to
SELECT WALK TEST
REMARKS
Press YES to View Circuits. Press NO to go to Event Log menu. Use
arrow keys to step through menus. Press 0 to quit
Press YES to step to nexr circuit. Use arrow keys to step through
circuits. Enter figures to select new circuit. Press NO to return to step 1
Press YES to step to nexr circuit. Use arrow keys to step through
circuits. Enter figures to select new circuit. Press NO to return to step
1. Enter 000 to exit
Press YES to return to step 1
Press NO to go to next menu. Press YES to repeat this menu. Use
arrow keys to step through menus. Press 0 to quit.
REMARKS
Press YES to View Event Log. Press NO to go to Select Walk Test
menu. Use arrow keys to step through menus. Press 0 to quit
Most recent event displayed. Press YES to step through events. Press
NO to return to step 1
Press NO to go to Select Walk Test menu. Use arrow keys to step
through menus. Press YES to repeat this menu. Press 0 to quit
REMARKS
Press YES to carry out Walk Test and go to step 4 if no Wards are
defined. Press NO to go to Bell Test menu. Use arrow keys to step
through menus. Press 0 to quit
Only if Wards are defined. Press Yes to Walk Test system circuits.
Press NO if system circuits are not to be tested
Only if Wards are defined. Enter numbers of Wards to be tested.
Leave with no wards shown if no circuits in wards are to be tested.
Press YES to Walk Test ward circuits
Operate circuits to test their functioning. Press any key to end test
Circuit details are displayed and sounder beeps for about 2 seconds
as each circuit is activated. Press any key to end test
Circuit details of each activated circuit displayed in sequence, and
program cycles until stopped, or None Activated is displayed. Press
YES/0 to return to step 1
Press NO to go to Bell Test menu. Use arrow keys to step through
menus. Press YES to repeat this menu. Press 0 to quit
TS2000 (V2+) User Manual
Page 5 - 2
Advertisement
Table of Contents
