Using Command 7; Using Command 9 - Bosch Security Systems User Manual

Using COMMAND 7

Using COMMAND 7 Using COMMAND 7: Using COMMAND 7 Using COMMAND 7
1. Press the COMMAND COMMAND COMMAND COMMAND COMMAND bar. The display shows
SYSTEM COMMAND SYSTEM COMMAND SYSTEM COMMAND SYSTEM COMMAND SYSTEM COMMAND.
2. Press the 7 7 7 7 7 key. The COMMAND 7 special alert
is programmed to:
___ notify the alarm company
___ ring a bell on the premises
___ display at the command center
Description:
_____________________________________________________
________________________________________________________________
__________________________________________________________________
__________________________________________________________________
50

Using COMMAND 9

Using COMMAND 9 Using COMMAND 9: Using COMMAND 9 Using COMMAND 9
1. Press the COMMAND COMMAND COMMAND COMMAND bar. The display shows COMMAND
SYSTEM COMMAND SYSTEM COMMAND SYSTEM COMMAND SYSTEM COMMAND SYSTEM COMMAND.
2. Press the 9 9 9 9 9 key. The COMMAND 9 special alert
is programmed to:
___ notify the alarm company
___ ring a bell on the premises
___ display at the command center
Description:
___________________________________________________
__________________________________________________________________
__________________________________________________________________
__________________________________________________________________