View Faulted Or Bypassed Points; Automatically Scroll Points; Manually Scroll Points - Bosch Security Systems User Manual

V V V V V ie ie ie ie iew F w F w F ault aulte e e e e d or Bypa ault d or Bypa d or Bypas s s s s se d or Bypa
w F w Fault ault d or Bypa
To properly arm the system, all the doors and windows
in the system must be in the normal (not faulted)
condition. Viewing the faulted points helps you find
faulted points and correct them so proper arming is
possible.
The command center offers two ways of displaying
faulted and bypassed point information. The first
causes the faulted or bypassed point information to
scroll automatically through the display. The second
allows you to manually scroll through each individual
point description.
To automatically scroll faulted or bypassed To automatically scroll faulted or bypassed To automatically scroll faulted or bypassed
To automatically scroll faulted or bypassed To automatically scroll faulted or bypassed
points: points: points: points: points:
1. Ensure the display shows idle text.
2. Press any number key. If there are faulted points,
AREA 1 ## FAULT AREA 1 ## FAULT AREA 1 ## FAULT AREA 1 ## FAULT AREA 1 ## FAULT (## = total number of faulted
points) is displayed first. This display is
followed by the point text descriptions of the
faulted points.
se se se d P d P oint oint oints s s s s
sed P d P d Point oint
If there are bypassed points, AREA 1 ## BYPAS
(## = total number of bypassed points) is
displayed, followed by the point text
descriptions of the bypassed points. These
displays scroll at the rate of 2 seconds each. If
there are no faulted or bypassed points, the
displays do not appear. Instead, the display
shows NO FAULTS/BYPAS
3. The display returns to idle text after scrolling
through the faulted and bypassed point
information. Press ESC
scrolling.
To manually scroll faulted or bypassed To manually scroll faulted or bypassed To manually scroll faulted or bypassed To manually scroll faulted or bypassed To manually scroll faulted or bypassed
points: points: points: points: points:
1. Ensure the display shows idle text.
2. Press the NEXT
faulted and bypassed point information. If there
are no faulted or bypassed points the display
shows NO FAULTS/BYPAS
3. Return to idle text at any time by pressing ESC
AREA 1 ## BYPAS AREA 1 ## BYPAS AREA 1 ## BYPAS
AREA 1 ## BYPAS
NO FAULTS/BYPAS NO FAULTS/BYPAS
NO FAULTS/BYPAS NO FAULTS/BYPAS.
ESC to stop the display from ESC ESC ESC
NEXT NEXT key repeatedly to display the NEXT NEXT
NO FAULTS/BYPAS NO FAULTS/BYPAS. NO FAULTS/BYPAS NO FAULTS/BYPAS
ESC ESC. ESC
ESC
15