Perimetr Inst ? Perimetr Inst; Turn On The Perimeter With No Delays; Using Perimetr Inst - Bosch Security Systems User Manual

PERIMETR INS PERIMETR INS PERIMETR INST ?
PERIMETR INS PERIMETR INS
COMMAND 2 COMMAND 2
COMMAND 2 COMMAND 2 COMMAND 2
T T T T T ur ur ur ur urn On t n On t n On t n On the P n On t he Per er er er erime he P he P he P
Delays Delays Delays
Delays Delays
Description Description Description
Description Description
Use this function to turn on only the perimeter of the
building, leaving the interior of the building disarmed.
This function allows no exit or entry delay time through
the perimeter, including the designated exit delay door.
This function is useful in residential systems, providing
the security of an armed perimeter while allowing
residents to move freely throughout the interior of the
premises.
It is also useful in commercial systems when working
before or after business hours to arm the perimeter.
Remember, there are no entry or exit delays when
COMMAND 2 COMMAND 2
COMMAND 2 COMMAND 2 is used. The system must be disarmed COMMAND 2
(turned off) to enter or exit the premises.
T ? T ? T ?
T ?
ime ime imet t t t t er W ime er Wit it it it ith N er W er W er W h N h N h No o o o o h N

Using Perimetr Inst:

Using Perimetr Inst: Using Perimetr Inst:
Using Perimetr Inst: Using Perimetr Inst:
1. Interior points are not armed with this command
and may remain faulted while arming with
COMMAND 2.
2. Press the COMMAND COMMAND COMMAND COMMAND bar. The display shows COMMAND
SYSTEM COMMAND SYSTEM COMMAND
SYSTEM COMMAND SYSTEM COMMAND. SYSTEM COMMAND
3. Press the 2 2 2 2 2 key.
Note: Note:
Note: Note: If you prefer, you may use the Command Menu Note:
in place of steps 2 and 3 to initiate this
function. Press the MENU
Command Menu, then press NEXT
until you reach the PERIMETR INST ?
Press ENT ENT. ENT ENT
ENT
4. The display shows PERIMETR INSTANT
arming the perimeter without delays, you cannot
enter or exit the premises without disarming the
system. Opening a perimeter door before
disarming generates an alarm. If this happens,
silence the alarm by turning the system off and
MENU MENU key to enter the MENU
MENU
NEXT NEXT NEXT repeatedly NEXT
PERIMETR INST ? PERIMETR INST ?
PERIMETR INST ? prompt. PERIMETR INST ?
PERIMETR INSTANT. After PERIMETR INSTANT PERIMETR INSTANT PERIMETR INSTANT
33