Connecting to Power
This Converter is a plug-and-play device.
Connect the supplied AC to DC power adaptor
with a power voltage of 7.5Vdc/1.5Amp to the
DC-Jack on the converter, and then attach the
plug into a standard AC outlet
Installing in a Chassis
The Converter can be fit into any of the expansion slots
on a special designed chassis.
First, install the converter onto a carrier supplied with
Step 1- Unscrew and pull out the media converter
Step 2- Plug in the media board to any of the vacant
Step 3- Fit the converter onto the carrier and use the
screw to secure it.