Connecting To Power; Sliding Switch - D-Link DMC-805G Quick Installation Manual

C P
ONNECTING TO OWER
1. This Converter is a plug-and-play device.
2. Connect the supplied AC to DC power adaptor with a power voltage
of 5Vdc/1Amp to the DC-Jack on the converter, and then attach the
plug into a standard AC outlet.
S S
LIDING WITCH
There is a sliding switch for duplex mode setting for fiber port. Refer to
the table below for more details.
Switch 1: Fiber mode switch
When the switch was turned to "On", it means that the fiber was
turned to forced mode, and "Off" for auto-negotiation mode.
Note: Be sure the opposite end is using the same setting (forced or
Auto-negotiation). And when using two converters at the same time,
the two converters MUST set to forced mode.
Switch 2: LLR
When the switch was turned to "On", it means that the LLR was
3