Removing The Seat - BESAFE iZi Up FIX User Manual

Placing the stability strap
• In order to install the stability strap,
put the iZi Up and the headrest of the
car in the most upward position.
• Guide the stability strap between the
cover and the surface of the iZi Up
head rest.
• Then guide the strap around both
bars of the head rest of the car.
• Adjust the iZi Up to the correct height
by turning the height adjusting lever.
• Tighten the stability strap by
connecting the velcro strap as tight
as possible (7).
6- Slide the lower part of the shoulder belt guide open and
position the belt in the guide. Make sure the belt is not twisted
and close the guide again (8).
7- Always close the car three point belt into
the buckle before driving, also when the
seat is not in use by a child! (9)
8

Removing the seat

1- Slide the lower part of the shoulder belt guide open and
(7)
remove the belt from the guide (10).
2- Pull the FIX adjustment
handle out (11).
3- Release the FIX connectors by
pressing the FIX release buttons
(8)
on the FIX connectors (12).
(9)
4- Push the FIX connectors right
inside the base (13).
5- Remove the ISOfix insertion clips
from the vehicle seat.
(10)
(11)
(12)
(13)
9 9