Removing The Seat - BESAFE iZi Up User Manual

• If the seat feels unstable, even after removal of the headrest
of the car, you can use the extra stability strap.
• The stability strap is not an essential safety part and needs
only to be used in cars when the iZi Up is connected with the
3-point car belt and when the head rest of the car can not
be removed.
Placing the stability strap
• In order to install the stability strap,
put the iZi Up and the headrest of the
car in the most upward position.
• Guide the stability strap between the
cover and the surface of the iZi Up
head rest.
• Then guide the strap around both bars
of the head rest of the car.
• Adjust the iZi Up to the correct height
by turning the height adjusting lever.
• Tighten the stability strap by
connecting the velcro strap as tight
as possible (2).
3-
Slide the lower part of the shoulder belt guide open and
position the belt in the guide. Make sure the belt is not twisted
and close the guide again (3).
6
4-
Always close the car three point belt into
the buckle before driving, also when the
seat is not in use by a child! (4)
(2)

Removing the seat

1- Slide the lower part of the shoulder belt guide open and
(3)
remove the belt from the guide (5).
2- Take iZi Up out of the car.
click!
(4)
(5)
7