• Prevent the seat from becoming trapped or weighed down by • iZi Combi ISOfix is approved in groups 0+ and 1, rearfacing luggage, seats and/or slamming doors. from 0-18 kg and group 1, forward-facing from 9-18 kg.
Rearward-facing: ISOfix installation • Make sure you can fit no more than one finger between the ! It is NOT ALLOWED to mount the seat in a front harness and your baby (1 cm). passenger seat WITH AN ACTIVATED AIRBAG. • If in doubt, consult either the car seat manufacturer or 1.
Page 4
Removing the seat 17. Click the ISOfix connectors in the ISOfix anchorage of the 1. If the seat is installed in the back seat of the vehicle, push vehicle. (32) the front seat of the vehicle forward as much as possible. 18.
Forward-facing belt installation Removing the seat 1. When mounting in the back seat of the vehicle, push the 1. Loosen the tension in the car belt by moving the belt guiding front seat of the vehicle forward as much as possible. hook inwards with the ratchet.
Positioning the child Removing and refitting the cover 1. Position of the shoulder straps: Check that the shoulder strap Removing the cover slots are level with your child’s shoulders. • Do take care when you remove the cover, as fitting the cover • too high (52) is done in reverse.
• DO NOT use the seat without floor support. harm the construction material of the seat. • DO NOT use the seat without tightening the • BeSafe advises that child seats should not be bought or sold front brace. second-hand. • Make sure the indicators are green before you drive.
• All BeSafe products are carefully designed, manufactured and Notice for REARFACING installation tested. All of our BeSafe child seats are tested periodically • This is a semi-universal ISOfix Child Restraint System. It is out of our continuous production in our test laboratory.