Security Setting - Advantech AIMB-501 User Manual

 Setup Prompt Timeout
This item allows you to change number of seconds to wait for setup activation
key.
 Bootup NumLock State
Select the Power-on state for Numlock.
 Quiet Boot
If this option is set to Disabled, the BIOS display normal POST messages. If
Enabled, an OEM Logo is shown instead of POST messages.
 GateA20 Active
This item allows you to select upon request or always.
Option ROM Messages

Sets display mode for option ROM.
 INT19 Trap Response
This item allows option ROMs to trap interrupt 19.
Boot Option PrioritiesNT19 Trap Response

Set the system boot order.
3.6

Security Setting

Select Security Setup from the AIMB-501 Setup main BIOS setup menu. All Security
Setup options, such as password protection and virus protection are described in this
section. To access the sub menu for the following items, select the item and
press<Enter>: Change Administrator / User Password.
 Administrator Password
Select this option and press <ENTER> to access the sub menu, and then type
in the password. Set the Administrator password.
User Password

AIMB-501 User Manual 62