Table of Contents
Advertisement
1.8.9
JCASE1: Case Open Sensor
The AIMB-501 motherboard contains a jumper that provides a chassis open sensor.
The buzzer on the motherboard beeps when the case is opened.
1.9
System Memory
AIMB-501 has two 240-pin memory sockets for 1333/1600 MHz memory modules
with maximum capacity of 16GB (Maximum 8GB for each DIMM). AIMB-501 sup-
ports only non-ECC DDR3 memory modules.
1.10
Memory Installation Procedures
To install DIMMs, first make sure the two handles of the DIMM socket are in the
"open" position, i.e., the handles lean outward. Slowly slide the DIMM module along
the plastic guides on both ends of the socket. Then firmly but gently (avoid pushing
down too hard) press the DIMM module well down into the socket, until you hear a
click when the two handles have automatically locked the memory module into the
correct position of the DIMM socket. To remove the memory module, just push both
handles outward, and the memory module will be ejected by the mechanism.
1.11
Cache Memory
The AIMB-501 supports a CPU with one of the following built-in full speed L3 caches:
8 MB for Intel Core i7-3770
6 MB for Intel Core i5-3550S
3 MB for Intel Core i3-3220
8 MB for Intel Core i7-2600
6 MB for Intel Core i5-2400
3 MB for Intel Core i3-2120
3 MB for Intel Pentium G850
2 MB for Intel Celeron G540
The built-in second-level cache in the processor yields much higher performance
than conventional external cache memories.
1.12
Processor Installation
The AIMB-501 is designed for LGA1155, Intel Core i7/Core i5/Core i3/Pentium/Cele-
ron processor.
11
AIMB-501 User Manual
Hide quick links:
Advertisement
Table of Contents
