Messages and tips
8.2 Error messages and faults
Essential procedure in case of error messages or
faults:
switch coffee machine off and then on again after a few
seconds. Repeat the process which caused the fault.
in many cases, this eliminates the fault and you can
continue working.
if this is not successful:
search in the error list for the error message and follow
the instructions.
if this is not successful or the error displayed is not
listed, please call the WMF service hotline!
some messages lead to blocking of individual
functions. You will notice this by the fact that the
beverage button light goes out. The beverage buttons
which are still illuminated can continue to be served.
fault messages on the display
Error message
Use brewer
Brewer end switch
Flow fault
(water tank is empty)
50
Action
Brewer is not used:
Use brewer
Brewer unit not inserted correctly:
Use brewing unit correctly
Brewing unit stiff:
Remove brewer, open brewing chamber with multitool,
apply a thin layer of the grease from the accessories kit
to the red seal ring
Check to make sure that float in the water tank runs
smoothly and fill water tank
See Chapter 6 Customer Care > Water tank
Bleed machine: Dispense hot water until a constant
stream of water comes out
WMF 1000 user manual