Switching On And Off; Switching On; Switching Off - WMF 1000 User Manual

3.8 Switching on and off

Switching on

Press the Off/C button

The greeting display appears, then the coffee machine
heats up.
WELCOME WELCOME
WMF 1000 WMF 1000
heating up ... heating up ...
Place a container for the rinse water under the

all-in-one spout (approx. 200 ml)
After the machine is heated up, there is a coffee system
rinse. This rinse warms up all pipes.
The coffee system rinse lasts approx. 40 seconds; after
this, the machine is ready to operate.
Your selection pls Your selection pls
24.10.2006 24.10.2006

Switching off

Place a container for the rinse water under the

all-in-one spout (approx. 200 ml)
Press the Off/C button for approx. 2 seconds

If beverages with milk (such as café latte) were prepared,
then you will be asked to perform a milk system rinse.
A coffee system rinse begins after that. Follow the display
texts. The machine switches off.
When switching the machine on and off, an coffee
system rinse starts automatically. The coffee system
rinse also starts when the machine is switched on and
off automatically in timer operation. Empty the drip tray
regularly, the rinse water will be emptied into the drip
tray by the all-in-one spout (approx. 200 ml). You can
place a container under the all-in-one spout and catch
the rinse water.
WMF 1000 user manual
08:15 08:15
operation
Time from switching on until
readiness state approx. 2 min.
Milk system rinse
See
Chapter 6 Customer Care
> Care programs
23