Cleaning The Machine - Cleaning Program - WMF 1000 User Manual

Care
After the rinse, some hot water remains in the milk hose.
hold the open end of the milk hose over the drip tray so
that the remaining rinse water can run out.
Push the all-in-one spout downwards

if the all-in-one spout is already in the beverage position,
the readiness state display appears:
your selection pls your selection pls
08:15 08:15
if products with milk were prepared, after 20 minutes or
at the latest when switching off, the machine automati-
cally requests a milk system rinse. Confirm and perform
the milk system rinse with the
The milk rinse can be put off with the Off/C button.

Cleaning the machine - Cleaning program

clean machine clean machine
OK: P brwse.: Care-bt OK: P brwse.: Care-bt
Confirm the machine cleaning with the

The individual steps appear on the display on request

empty drip tray empty drip tray
refill water tank refill water tank
place 3l container place 3l container
under coffee outlet under coffee outlet
Place an appropriate container (min. 3 litres) under

the all-in-one spout
36
14.04.2006 14.04.2006
P and button.


P button
Start the care program without
request
See Chapter 6.3
Duration of cleaning program
approx. 5 minutes.
WMF 1000 user manual