Dispensing Test; Water Volume; Coffee Strength; Milk Volume - WMF 1000 User Manual

Dispensing test

Each setting can be tested during setting.

Water volume

water volume: 35ml water volume: 35ml
OK: P change: -/+ OK: P change: -/+
Example: press the plus button until the water volume

is increased to 37 ml
water volume: 37ml water volume: 37ml
OK: P OK: P
You can start a preparation test with the new values at
any time.
Place an appropriate drinking vessel under the

all-in-one spout
Press the beverage button again

The beverage is dispensed

Confirm the setting by pressing the

water volume: 37ml water volume: 37ml
OK: P change: -/+ OK: P change: -/+

Coffee strength

strength: 86% (5s) strength: 86% (5s)
OK: P change: -/+ OK: P change: -/+

Milk volume

in seconds, only beverages with milk
milk volume: 25 sec. milk volume: 25 sec.
OK: P change: -/+ OK: P change: -/+
The volume dispensed depends on the milk lever posi-
tion, the milk temperature and the milk nozzle selected.
Determine the desired volume with a dispensing test.
WMF 1000 user manual
Test:bev.btn. Test:bev.btn.
P button

Setting
27