Table of Contents
Advertisement
The description of every setup item is listed below:
Item
Weekly Schedule Select the time period in a week of this schedule. There are
Events
Dedicated
Schedule
total 48 x 7 blocks in a week schedule, where every block
represents half an hour.
You can use mouse to click on the block to add or delete
time period. If recording is activated in that time period, the
block will appear as light blue.
To add or delete a time period, select 'ADD' or 'DEL' first,
then click the time period block. In order to start the
schedule recordings click the schedule button
main screen of the software.
Select the event to trigger recording:
Round-The-Clock: Recording is time activated (according
to schedule).
Motion Detection: Recording is motion-activated.
DI Input: Recording is activated by DI (Digital Input) signal
located on IP camera. IP camera must have DI port and not
every IP camera is equipped with DI.
If you just want to add a new recording schedule between
certain time and this schedule will only happen once but not
every week, you can use this function to specify a time
period.
Select 'Start' and 'End' date / time, and click
'Add/Modify' button to add the time period to the list. You
can also select an existing time period and make changes,
and click 'Add /Modify' button to save changes.
To remove an existing schedule, select an existing schedule,
and then click 'Remove' button.
DG-SC4600I/DG-SC4600PI User Manual
Description
92
on the
Advertisement
Table of Contents
