Digisol DG-SC4600PI User Manual page 16

DG-SC4600I/DG-SC4600PI User Manual
3. Connect Ethernet cable to LAN port.
This Ethernet port supports IEEE 802.3af PoE standard. It gets power wh en
it is connected to PoE switch.
4. Plug DC power adapter to power outlet on the wall.
5. C nect DC power cable to IP Camera's DC power
on connector.
If everything is ok, you should see the left LED light on LAN port lit up. If not,
please recheck every step and try again, or ask your dealer of purchase for help.
16