Digisol DG-SC4600PI User Manual page 85

The description of every item is listed as follows:
Item
Select Camera
Record Mode
Motion Detection
Setting
Please select an IP camera from the list to setup its
recording behavior. SKYROS iView will attempt to
connect to selected IP camera, if it's not connectable, you
will receive an error message later.
You can decide the recording behavior for this IP camera:
 Monitor only, not record: SKYROS iView will
not record video of this IP camera.
 Round The Clock: SKYROS iView will record
video of this IP camera all the time.
 Motion Detection: SKYROS iView will only
record video when motion is detected.
 Apply to All Cameras: Click this button to
apply current record control settings to all IP
cameras on the list.
Sets motion detection area and sensitivity. Please select an
IP camera from the list, and its video will appear with a
grid pattern:
Use the mouse to click blocks on the grid pattern to assign
the areas you wish SKYROS iView to detect / ignore
motion. SKYROS iView will detect motion for areas which
are NOT covered by blocks only.
DG-SC4600I/DG-SC4600PI User Manual
Description
85