Digisol DG-SC4600PI User Manual page 55

To add a new event, click
is listed below:
Item
Enable Setting
Title
Motion Detection
Digital Input
1 ~ 2
Enable Schedule Time
Enable FTP
Enable EMAIL
Enable Samba
(Net Storage)
Enable SD CARD
Trigger digital output
for xx second(s).
'New' button and the description of every setup item
Check this box to enable this event. If you just want
to disable this event temporarily, you can uncheck
this box to disable the event without deleting it.
Input any description text for this event so you can
identify it quickly. You can use alphabets, num
and symbols include:!$-.@^_~ (Note: no spaces
allowed).
Check this box and this event wil
one of the motion detection windows detects motion.
Check this box and this event will be activated when
digital input 1 or 2's input signal is high or low
(select from dropdown list).
Check this box and this event will be activated when
designated weekday and time is reached.
You also have to check weekday box, and
from dropdown list. If you select 'Always' as time,
this event will be activated throughout the day.
Check this box and IP camera will save file on FTP
server (refer to 'FTP Server' setting in 'Event Server'
tab) when this event is activated.
Check this box and IP camera will send an Email to
designated recipien
setting in 'Event Server' tab) when this event is
activated.
Check this box and IP camera will save file on sam
server (refer to 'Samba Server' setting in 'Ev
Server' tab) when this event is activated.
Check this box and IP camera will save file on SD
card when this event is activated. A working SD card
must be inserted into IP camera in advance.
Check this box and IP camera will trigger digital
output to 'high' state for xx seconds when this event
is activated, where 'xx' seconds must be defined by
the dropdown list.
55
DG-SC4600I/DG-SC4600PI User Manual
Description
l be activated when
t address (refer to 'SMTP Server'
bers,
select time
ba
ent