Rear View - Digisol DG-SC4600PI User Manual

Rear View

Item
1. MIC IN
2. AUDIO OUT
3. SD
4. RESET
5. ETHERNET
6. DI/DO (Digital
Input / Digital
Output)
Connects to external microphone to input audio signal to IP
camera. Use 3.5mm audio cable.
Connects to external audio amplifier to output voice. Use
3.5mm audio cable.
Inserts SD card for video recording. Maximum 32GB of SD-
HC card supported.
When the IP camera is not functioning properly, you can use
a pen or similar object to press this reset button to reset the IP
camera. You can also press and hold this button till the power
LED goes off to clear all settings of IP camera, including
administrator password, then the IP camera will download
default settings automatically.
Connect to your local area network by Ethernet cable.
Left LED: LAN connectivity
Right LED: Power Indicator
Digital input / output dry contacts. Connects to external
peripherals by wire. See next page for pin definitions.
WARNING: DO NOT CONNECT POWERED CABLE!
DG-SC4600I/DG-SC4600PI User Manual
Description
12