Table of Contents
Advertisement
* Forward - Forwards the packets.
* Drop - Drops the packets.
24. Click
button.
Apply
UPnP Configuration
(for Windows XP only)
Before you attempt to configure UPnP (Universal Plug and Play), please
ensure your computer supports it.
Install UPnP on your computer
1. Go to Start
Control Panel
2. Click Network Connections.
3. Click Advanced in menu bar.
4. Select Optional Networking Components.
5. Click Details.
6. Select Universal Plug and Play.
7. Click "OK" and then "Next".
8. Restart the computer after installation.
Checking the UPnP was installed
1. Go to Control Panel
Network Connection.
2. You will see the Internet Connection icon under the Internet
Gateway section.
Configure UPnP
A UPnP device can dynamically join a network, obtain an IP address,
convey its capabilities, and learn about other devices on the network. In
Add/Remove Programs.
32
Web Management
Login to the Web Management Interface
The Micro-Router/4 and 7 both feature GUI Web Management programs.
You can use a browser to connect to your Router for management and
configuration. The following steps show the login to the Router.
Using a Web Browser to configure your Router
Unicom recommends the following browsers for best results.
Windows (Internet Explorer 5.0 or higher)
Macintosh OS 9 and OS X (Netscape 7.0 or higher)
Linux & Unix (Assorted browsers)
1. Launch your web browser and enter the Router's Default IP
(192.168.1.1) address in the URL field.
2. You will see the Router's Login Screen. (see below)
3. Type "root" into the Password field and click the
4. This will bring you to the Router's MAIN MENU screen. (see below)
(Netscape 6.0 or higher)
Login
button.
9
Advertisement
Table of Contents
