Changing The Password - UNICOM FEP-72104T User Manual

Ethernet
- encapsulation choice 1
• Ethernet: Also called Dynamic TCP/IP. If you are connected to an ISP
that automatically assigns a DNS address, use this choice. Most
newer ISPs use this type of system.
• Service Type: Select the service type.
12
4. Select the Filter Rule number by clicking on radio button.
5. Click button for detail Filter Rule configuration.
Apply
6. Active: Enables this filter rule.
7. Offset: The starting byte of the data portion in the packet that
you wish to compare.
8. Length: The byte count of the data portion in the packet that you
wish to compare. The range is 0 to 8.
9. Mask: The Mask (in Hexadecimal) to apply to the data portion
before comparison.
10. Value: The value (in Hexadecimal) to compare with the data
portion.
11. More: "Yes" means that a matching packet is passed to the next
Filter Rule before an action is taken. "No" specifies that the
packet is disposed of according to the action fields. If "Yes" is
selected, then Action Matched and Action Not Matched will default
to "Check Next Rule".
• When the More field is marked "No" the Action Matched field
offers three selections
* Check Next Rule - Checks next available Filter Rule.
* Forward - Forwards the packets.
* Drop - Drops the packets.
• When the More field is marked "No" the Action Not Matched field
offers three selections
* Check Next Rule - Checks next available Filter Rule.
* Forward - Forwards the packets.
* Drop - Drops the packets.
29