Default Settings
The default Router configuration is as follows:
• IP address: 192.168.1.1
• Password: root
• Subnet mask: 255.255.255.0
• DHCP Server (LAN): Enable
• DHCP Client (WAN): Enable
• Filter (WAN): Web service
If you want to reset to the default configuration, press the "Default
Button" on the rear panel of the Router. Follow the steps below to reset
the Router to default configuration.
1. Use a pointed object to depress the Default Button until the LAN
LEDs turn off and then release it.
2. Wait about 10 seconds for the router to finish restarting.
3. When the Router restarts, proceed to step 6. If the router does not
restart, go to step 4.
4. Cycle power off and on.
5. Repeat steps 1 and 2.
6. Login to Web Management to ensure the router is working properly.
Advanced Configuration
Advanced configuration provides a more detailed configuration of the
Router. User can configure the functions to specific needs.
16
Configure system MAC address.
1. WAN MAC Address: configure WAN MAC address.
• Factory default: Use the factory default.
• Spoof this computer's MAC address-IP address: Automatically
detects the router's WAN MAC address.
2. Click
button.
Apply
NAT Configuration
Configure the internal mapping port for external accessing.
1. Default Server: A default server receives packets from ports that
are not specified in the mapping rule list. If you do not assign a
default server, then all packets received for ports not specified in
mapping rule table will be dropped.
25