Password Setting - UNICOM FEP-72104T User Manual

5. User: When updating the information to an ISP DNS, the ISP
needs a User ID to verify the account.
6. Password: When updating the information to an ISP DNS, the ISP
needs a password to verify the account.
7. Enable Wildcard: This option provides domain name mapping to
reach your web domain without keying in a specific domain
address. For example: the domain name is www.bbb.com. User can
browse aaa.www.bbb.com which will automatically redirect to
www.bbb.com instead of displaying an error message.
8. Off line: This option is only available when Custom DNS is
selected in the DDNS Type field. Contact your Dynamic DNS
service provider to have traffic redirected to an URL (that you
specify) while you are off line.
9. Click button.
Apply

Password Setting

User can change the default password. We strongly suggest changing
the password to enhance network security.
1. Old Password: Type in the default password or the password you
would like to change.
2. New Password: Type in the new password. Password can be
numbers and/or characters in any combination.
3. Retype to Confirm: Re-enter the new password.
4. Click button.
Apply
18
• Idle Timeout: The time before disconnect. The default value is 300
seconds (5 min).
PPTP
- encapsulation choice 3
• PPTP: A network protocol that enables secure transfer of data from
a remote client to a private server, creating a Virtual Private Network
(VPN) using TCP/IP-based networks
• Username: Username for login PPTP server
• Password: Password for login PPTP server
• Dial-Up Connection: Keeps the connection with PPPoE server from
disconnecting.
• Idle Timeout: The time before disconnect. The default value is 300
seconds (5 min).
• My IP Address: IP address assigned by your ISP. It usually will be a
WAN interface IP address.
• My IP Subnet Mask: IP subnet mask.
• Server IP Address: IP address of the PPTP server.
• Connection ID/Name: Your identification name for the PPTP server.
• Click button to go next step.
Apply
23