Console Management - UNICOM Smart-Switch/801 User Manual

Console Management

Get user manuals: See SafeManuals.com
Console Configuration enables use of a local console terminal or PC to
control ports and VLANs on the Smart-Switch/801.
Main Menu
The Main Menu shows all available switch configuration options.
Figure 4-3. The Main Menu of Console Management
Per Port Setting
From the Main Menu, choose the 1
The following screen appears (see fig 4-4). The default Per Port Settings
are all Auto Negotiation and the default fiber port setting is 100M / Full-
duplex mode.
To modify a port's status, first choose the port number. In the following
example, we choose Port 1 by typing "1". Five different port duplex
modes are available: Auto-Negotiation, Force to 100M and FDX mode,
Force to 10M and FDX mode, Force to 100M and HDX mode, Force to 10M
and HDX mode. The Fiber port also features four configurable modes.
(see Figure 4-5). Type in the required item number here to set the port
duplex mode.
st
Item by typing " 1 " into the blank.
13
Smart-Switch/801