Console Management; Login In The Console Interface - UNICOM GST Series User Manual

All manuals and user guides at all-guides.com

4. Console Management

Login in the Console Interface

When the connection between Switch and PC is ready, turn on the PC and
run a terminal emulation program or Hyper Terminal and configure its
communication parameters to match the following default characteristics of
the console port:
Baud Rate: 9600 bps
Data Bits: 8
Parity: none
Stop Bit: 1
Flow control: None
Figure 4-1. The settings of communication parameters
After finishing the parameter settings, click "OK". When the blank screen
shows up, press Enter key to bring out the console management main screen.
Then, press any key to enter the function management screen.