Wizard Setup - UNICOM FEP-72104T User Manual

12. Click button.
Apply
TCP/IP Filter
The TCP/IP filter allows you to base the rule on the fields in the IP and
the upper layer protocol. TCP/IP filter has a default filter rule.
13. Click on radio button of the number
14. Click button to enter File rule selection interface. Each Filter
Edit
can configure up to six filter rules.
15. Filter Set Comments: Give a name to this Filter Rule. If the File
Set Comments column is left blank, the Filter Rule will be deleted.
16. Select the Filter Rule number by clicking on radio button.
17. Click button for detail Filter Rule configuration.
Edit
Edit
30

Wizard Setup

The Wizard Setup provides the fastest way to configure the Micro-Router.
The Wizard will take you through the configuration process step by step.
When you have finished the Wizard setup, you can go to Advanced
Configuration for more detailed configuration. (see next page)
1. System Name: give a name to your Router
2. Domain Name: type in your domain name (e.g. www.myisp.com)
Click button to go to next step.
Next
Encapsulation: Select the proper encapsulation type. The three
choices are Ethernet, PPP over Ethernet, and PPTP. Following are
the terms and descriptions.
11