Table of Contents
Advertisement
WAN Interface Configuration
User must configure WAN interface for accessing Internet connection.
1. WAN IP Address Assignment:
• Get automatically from ISP (Default): When you select this
option you don't need to assign an IP for this router. The Router
will automatically get the IP from the service provider
• Use fixed IP address: Users can assign a specific IP address to
the WAN interface. Fill in the IP, Subnet Mask, and Gateway IP.
2. Network Address Translation (NAT): Enables NAT function. When
an internal network uses a private IP to access the Internet, the
NAT will automatically translate the private IP to a public IP.
3. RIP Direction: controls the sending and receiving of RIP packets.
• None: The router will not send any RIP packets and will ignore
any RIP packets received.
• Both: The router will broadcast its routing table periodically and
incorporate the RIP information that it receives.
• InOnly: The router will incorporate the RIP information that it
receives and drop or ignore the rest of RIP packets.
• OutOnly: The router will broadcast its routing table periodically
and drop or ignore the rest of RIP packets.
4. RIP Version: select the RIP version – RIPv-1, RIP-2B, and RIP –2M.
5. Multicast: select the multicast type – IGMP-v1 and IGMP-v2. The
default value is no multicast.
6. Click
button.
Apply
24
System Configuration
In the System configuration, users can configure general system
information, DDNS, change the password, and configure system date
and time.
General Settings
In the General settings, users can configure System Name and Domain
Name. Click the
button to clear the fields.
Reset
1. System Name: give a name to this Router.
2. Domain Name: key in your domain name.
3. Click
button to go next step.
Reset
DDNS Configuration
The DDNS (Dynamic Domain Name System) allows you to use Static
Host Name mapping with a dynamic IP address. When you change the
domain name, the Router will automatically update your new domain
name to your ISP DNS.
1. Active: Click the checkbox to activate the DDNS function.
2. Service Provider: Select your ISP.
3. DDNS Type: Select the DDNS type. Dynamic DNS: use dynamic
DNS. Static DNS: DNS is static. Custom DNS: a special DNS that
provided by ISP.
4. Host name: You can type in the host name that will match your
web server IP address. You can fill in up to three different host
names for mapping.
17
Advertisement
Table of Contents
