Advertisement
3. Use a 1%6" combination
wrench a ndchannel lockpliers to
attach t heflexible c onnector totheadapters. Check t hat
connector isnotkinked.
A
B
C
D
A. Gas pressure regulator
B. Use pipe-joint
compound
C. Adapter (must have 7/2"male
pipe thread)
D. Flexible connector
E. Manual gas shutoff valve
F. F2" or 3/4"gas pipe
G. Use pipe-joint
compound
H. Adapter
Complete
Connection
1. Open Triple Task Oven Drawer to its fully open position. Push
in on the middle tab while lifting to release silver tabs.
Remove oven drawer and set it aside on a protected surface.
See the Use and Care Guide for detailed oven drawer
removal instructions.
2,
3,
B
A
A. Silver tab
B. Middle "push in" tab
Check that the gas pressure regulator shutoff valve is in the
"on" position.
_
A
A. Gas pressure regulator shutoff valve
Open the manual shutoff valve in the gas supply line, The
valve is open when the handle is parallel to the gas pipe.
4.
5.
Test all connections
by brushing on an approved
noncorrosive
leak-detection
solution. Bubbles will show a
leak. Correct any leak found.
Remove cooktop burner caps and grates from parts
package. Burner caps should be level when properly
positioned, If burner caps are not properly positioned,
surface burners will not light. Place burner grates over
burners and caps.
A. Burner base
B. Burner cap
C. Burner grate
Electrica_ Shock Hazard
Pmuginto a grounded
3 prong outlet.
Do not remove ground prong,
Do not use an adapter,
Do not use an extension
cord.
Failure to follow these instructions
can resumt in death,
fire, or eJectricam shock.
6. Plug into a grounded 3 prong outlet,
A. Closed valve
B. Open valve
Advertisement
